Honda ACCORD HYBRID 2005 Service Manual page 92

Engine Assembly
E n g i n e I n s t a l l a t i o n ( c o n t ' d )
15. Tighten the new rear m o u n t bolt (A), then install the
rear m o u n t stop (B) w i t h n e w nuts.
16. Connect the rear active control engine m o u n t
actuator connector (C).
17. Tiahten the n e w front m o u n t bolt (A), then install
19. Tighten the t w o bolts securing the upper bracket.
20. Raise the vehicle on the hoist to full height.
2 1 . Install exhaust pipe A using n e w gaskets (B) and
new self locking nuts (C).
the f r o n t m o u n t stop (B) w i t h n e w nuts.
18. Connect the front active control engine m o u n t
actuator connector (C), then install the harness
c l a m p (D).
1 0 x 1 . 2 5 mm 1 0 x 1 . 2 5 m m '
54 N m 33 N m 8 x 1 . 2 5 m m
(5.5 k g f m , (3.4 k g f m , 22 N m
40lbfft) 25 Ibfft) (2.2 k g f m ,
Replace. Replace. 16 lbf-ft)
5-14