Honda ACCORD HYBRID 2005 Service Manual page 93

22. Install a new set ring on the end of each driveshaft,
then install the driveshafts. Make sure each ring
" c l i c k s " into place in the differential and
intermediate shaft.
23. Connect the suspension lower arms to the knuckles
(see step 5 on page 18-22).
24. Connect the tie-rod end ball joints to the knuckles
(see step 29 on page 17-58).
25. Install the damper fork (see step 3 on page 18-21).
26. Connect the stabilizer links (see page 18-23).
27. Install the splash shield.
28. Install the front wheels.
29. Lower the vehicle on the hoist.
30. Install the ATF cooler hoses to the transmission
(see step 38 on page 14-250).
3 1 . Install the shift cable (see step 46 on page 14-251).
32. Install the heater hoses (A) and hose clamp (B).
A
33. Install the upper radiator hose (A) and lower
radiator hose (B).
(cont'd)
5-15