Honda ACCORD HYBRID 2005 Service Manual page 86

Engine Assembly
E n g i n e R e m o v a l ( c o n t ' d )
47. Remove the connector bracket f r o m the front
cylinder head; use the bracket bolt hole to attach
the engine balancer b a r f r o n t a r m .
48. Remove the harness c l a m p bracket f r o m the rear
cylinder head; use the bracket bolt hole to attach
the engine balancer bar rear a r m .
49. Lift and support the engine w i t h the engine hanger
(A) and engine balancer bar (B). Attach the front
arm (C) to the front cylinder head w i t h a spacer (D)
and the connector bracket bolt (10 x 1.25 m m ) (E).
Attach the rear arm (F) to the rear cylinder head
w i t h the harness clamp bracket bolt (8 x 1.25 m m )
(G).
A B
AAR-T-12566 VSB02C000019
50. Remove the t w o bolts securing the upper bracket.
5-8