Bgp Bestpath As-Path Ignore - Dell Z9500 Reference Manual

router bgp 1
Dell(conf)#router bgp 1
Dell(conf-router_bgp)#bgp asnotation asplain
Dell(conf-router_bgp)#ex
Dell(conf)#do show run |grep bgp
router bgp 1
Dell(conf)#
Related bgp four-octet-as-support
Commands

bgp bestpath as-path ignore

Ignore the AS PATH in BGP best path calculations.
Z9500
Syntax
bgp bestpath as-path ignore
To return to the default, enter the no bgp bestpath as-path ignore
command.
Defaults Disabled (that is, the software considers the AS_PATH when choosing a route as
best).
Command ROUTER BGP
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
7.7.1.0
Usage If you enable this command, use the clear ip bgp * command to recompute
Information
the best path.
344
bgp four-octet-as-support
bgp asnotation asdot+
bgp four-octet-as-support
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
— enables 4-byte support for the BGP process.
Border Gateway Protocol