NEC Univerge SV8100 Features And Specifications Manual page 129

UNIVERGE SV8100
Program
Program Name
Number
44-03-01 Dial Analysis Extension Table –
Dial
44-03-02 Dial Analysis Extension Table –
ARS/F-Route Select Table
Number (1~250)
44-03-03 Dial Analysis Extension Table –
ARS/F-Route Select Table
Number (251)
44-03-04 Dial Analysis Extension Table –
Next Table Area Number (252)
44-04-01 ARS/F-Route Selection for Time
Schedule
44-05-01 ARS/F-Route Table – Trunk Group
Number
44-05-02 ARS/F-Route Table – Delete Digits For each ARS/F-Route table (1~500)
44-05-03 ARS/F-Route Table – Additional
Dial Number Table
SV8100 Features and Specifications Manual
Description/Comments
Set the Dial digits (24 digits max:
#
1~9, 0 , @) to be used for the
Dial Extension Analysis Table. When
Program 44-02-02 is set to type 3,
this program sets the dial extension
analysis table. These tables are
used when the analyzed digits must
be more than eight digits. To enter a
wild card/don't care digit, press Line
Key 1 to enter an @ symbol.
When dialed digits match the setting
in Program 44-03-01, select the
ARS/R-Route table number (0~500)
to be used for the Dial Extension
Analysis Table.
If the received digits are not
identified in tables 1~250, the
F-Route selection table number
(0~500) defined in table 251 is used.
If the received digits do not match
the digits set in tables 1~250, table
number 252 is used refer to the next
Extension Table Area (1~4) to be
searched.
Assign each ARS/F-Route Selection
number (1~500) to an ARS/F-Route
table number for each ARS/F-Route
time mode. There are eight time
modes for ARS/F-Route Access.
Select the trunk group number to be
used for the outgoing ARS call.
assign a priority number (1~4). Enter
the number of digits to be deleted
(0~255) from the dialed number.
For each ARS/F-Route table (1~500)
assign a priority number (1~4). Enter
the table number (defined in
Program 44-06) for additional digits
to be dialed (0~1000).
Assigned Data
Up to 24 digits
Digits = 1~9, 0, , #, @
(Press Line Key 1 for
wild character @)
(default not assigned)
0~500
(ARS/F-Route Table
Number)
With Program 44-01 set
to 0, Program 44-05 is
checked.
With Program 44-01 set
to 1, Program 44-04 is
checked.
(default = 0)
0~500
(ARS/F-Route Table
Number)
With Program 44-01 set
to 0, Program 44-05 is
checked.
With Program 44-01 set
to 1, Program 44-04 is
checked.
(default = 0)
0~4
(default = 0)
ARS/F-Route Time
Mode: 1~8
ARS/F-Route Table
Number = 0~500
(default = 0)
0~100, 255
0 = No Setting
255 = Extension Call
(default = 0)
0~255
(255 = Delete All)
(default = 0)
0~1000
(default = 0)
Issue 1.0
Level
1 2 3
2 - 105