NEC Univerge SV8100 Features And Specifications Manual page 119

UNIVERGE SV8100
Related Features
Central Office Calls, Placing
Code Restriction
Dial Tone Detection
Speed Dial – System/Group/Station
Trunk Group Routing
Trunk Queuing/Camp On
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.
Level 2 – these are the next most commonly assigned programs for this feature.
Level 3 – these programs are not often assigned and require an expert level working knowledge of
the system to be properly assigned.
Program
Program Name
Number
11-01-01 System Numbering
11-09-01 Trunk Access Code
11-09-02 2nd Trunk Route Access Code
SV8100 Features and Specifications Manual
Description/Comments
Set the system internal (Intercom)
numbering plan. The numbering plan
assigns the first and second digits
dialed and affects the digits an
extension user must dial to access
other extensions and features, such
as service codes and trunk codes. If
the default numbering plan does not
meet the site requirements, use this
program to tailor the system
numbering to the site.
Specify the digit or digits to be used
to access ARS (normally 9).
Use this program to define additional
trunk access codes.When a user
dials the Alternate Trunk Route
Access Code, the system routes
their call to the Alternate Trunk
Route.
Assigned Data
Refer to SV8100
Programming Manual
for a detailed description
of this program.
Dial up to four digits
(default = 0)
Dial up to four digits
(default not assigned)
Issue 1.0
Level
1 2 3
2 - 95