4. Tighten the M2*3 screw to secure the WLAN card to the computer.
5. Install the:
a.
battery
b.
base cover
6. Follow the procedure in
Memory module
Removing memory module
1. Follow the procedure in
2. Remove the:
a.
base cover
b.
battery
3. To remove the memory module:
a. Pry the clips securing the memory module until the memory module pops-up [1].
b. Lift the memory module away from the connector [2].
Installing memory module
1. Insert the memory module on the memory connector until the clips secure the memory module.
2. Install the:
a.
battery
b.
base cover
3. Follow the procedure in
After working on your thin
Before working on your thin
After working on your thin
client.
client.
client.
Disassembly and reassembly
25