Cfgchassispowerbuttonenable (Read/Write); Cfgchassispowercapbtu (Read/Write); Cfgthermalenhancedcoolingmode; Cfgkvminfo - Dell PowerEdge VRTX Reference Manual
Chassis management controller version 1.0 for dell poweredge vrtx racadm command line reference
Hide thumbs
Also See for PowerEdge VRTX:
- Reference manual (931 pages) ,
- User manual (193 pages) ,
- Owner's manual (159 pages)
Table of Contents
Advertisement
cfgChassisPowerButtonEnable (Read/Write)
Description
Legal Values
Default
cfgChassisPowerCapBTU (Read/Write)
Description
Legal Values
Default
cfgThermalEnhancedCoolingMode
Description
Legal Values
Default
cfgKVMInfo
This group is used to view the mapping information for the KVM.
Use this object with the config or getconfig subcommands.
To use this object property, you must have Chassis Configuration Administrator privilege.
cfgKvmMapping Read or Write
Description
Legal Values
Default
cfgKvmSlot<num>Enable Read or Write
Description
142
Maps the slots to the KVM.
1, 2, 3, and 4 are the slot numbers that are specified.
1
Enable the slots (1 to 4) to access using KVM:
•
cfgKvmSlot1Enable
Indicates if the chassis power button is enabled or
disabled.
•
0 (disabled)
•
1 (enabled)
None
Indicates the maximum power consumption limit (in
BTU/hr) for the entire chassis. The command generates an
error if server throttling is necessary to achieve the power
goal based on the value for this setting.
9264 - 56931 BTU/hr
43221 BTU/hr
Enables/disables the enhanced cooling mode
•
Enable: 1
•
Disable: 0
0
Advertisement
Table of Contents
