System Health And System Id Indicator Codes - Dell PowerEdge HS5620 Installation And Service Manual

System health and system ID indicator codes

The system health and system ID indicator is located on the left control panel of the system.
Figure 136. System health and system ID indicator
Table 94. System health and system ID indicator codes
System health and system
ID indicator code
Solid blue
Blinking blue
Solid amber
Blinking amber
174 System diagnostics and indicator codes
Condition
Indicates that the system is powered on, is healthy, and system ID mode is not active. Press
the system health and system ID button to switch to system ID mode.
Indicates that the system ID mode is active. Press the system health and system ID button to
switch to system health mode.
Indicates that the system is in fail-safe mode. If the problem persists, see the
section.
Indicates that the system is experiencing a fault. Check the System Event Log for specific
error messages. For information about the event and error messages generated by the
system firmware and agents that monitor system components, go to
Up > Error Code, type the error code, and then click Look it up.
Getting help
qrl.dell.com > Look