System Health And System Id Indicator Codes - Dell PowerEdge R360 Installation And Service Manual

Table 72. Status LED indicators and descriptions (continued)
Icon Description
Memory indicator
PCIe indicator

System health and system ID indicator codes

The system health and system ID indicator is located on the left control panel of the system.
Figure 88. System health and system ID indicator
120 System diagnostics and indicator codes
Condition
voltage out of range, or a failed
power supply unit (PSU)
voltage regulator).
The indicator turns solid amber if a
memory error occurs.
The indicator turns solid amber if a
PCIe card experiences an error.
Corrective action
the PSU, check the LED on the PSU. Reseat the
PSU.
or
If the problem persists, see the
Getting help section.
Check the System Event Log or system messages
for the location of the failed memory. Reseat the
memory module.
If the problem persists, see the
Getting help section.
Restart the system. Update any required drivers for
the PCIe card. Reinstall the card.
If the problem persists, see the
Getting help section.