About This Guide; Objectives; Audience; Supported Platforms And Required Ftos Versions - Dell FORCE10 Open Automation Configuration

About this Guide

Objectives

This document describes the components and uses of the Open Automation
Framework designed to run on the Force10 Operating System (FTOS), including:
•
•
•
•
Information another feature, Bare Metal Provisioning (BMP) that interacts with the
Open Automation Framework can be found in the

Audience

This document is intended for data center managers and network administrators
responsible for virtualization or system management. It assumes basic knowledge
about virtualization technology and networking.
Note: Although this document contains information on protocols, it is not intended to provide complete
information on protocol configuration and usage. For this information, refer to the document listed in
Related Documents on page 7
Supported Platforms and Required FTOS
Versions
The Open Automation 2.0 release is supported on the following Dell Force10
switches and minimum FTOS versions:
•
•
Smart Scripting
Virtual Server Networking (VSN)
Programmatic Management
Web graphic user interface (GUI) and HTTP Server
and the IETF Requests for Comment (RFCs).
S55 switches require FTOS version 8.3.5.2 or later.
S60 switches require FTOS version of 8.3.3.7 or later.
FTOS Configuration Guide.
About this Guide | 5
1