Show Eaps - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.
EAPS Commands

show eaps

show eaps {<eapsDomain>} {detail}
Description
Displays EAPS status information.
Syntax Description
eapsDomain
detail
Default
N/A.
Usage Guidelines
If you enter the
keyword.
detail
Use the optional domain
domain.
Some state values are different on a transit node than on a master node.
The fields displayed are as follows:
EAPS Enabled:
EAPS Fast Convergence:
EAPS Display Config Warnings
Number of EAPS instances:
Name:
1148
Specifies the name of an EAPS domain.
Specifies all available detail for each domain.
command without a keyword, the command displays less than with the
show eaps
parameter to display status information for a specific EAPS
eapsDomain
Current state of EAPS on this switch:
• Yes—EAPS is enabled on the switch.
• No—EAPS is not enabled.
Displays only when Fast Convergence is on.
Displays the setting for loop protection messages:
• On—Loop protection messages are displayed (this is the default behavior).
• Off—Loop protection messages are not displayed.
Number of EAPS domains created. The maximum number of EAPS domains
per switch is 128.
The configured name for this EAPS domain.
ExtremeWare XOS 11.5 Command Reference Guide