Show Eaps - Extreme Networks ExtremeWare Command Reference Manual

show eaps

show eaps {<name>} {detail}
Description
Displays EAPS status information.
Syntax Description
name Specifies the name of an EAPS domain.
detail Specifies all available detail for each domain.
Default
N/A
Usage Guidelines
If you enter the
keyword.
detail
Use the optional domain name parameter to display status information for a specific EAPS domain.
The output displayed by this command depends on whether the node is a transit node or a master
node. The display for a transit node contains information fields that are not shown for a master node.
Also, some state values are different on a transit node than on a master node.
The fields displayed are as follows:
EAPS Enabled:
EAPS Fast Convergence:
Number of EAPS instances:
EAPSD-Bridge links:
Name:
(instance= )
ExtremeWare 7.7 Command Reference Guide
command without a keyword, the command displays less than with the
show eaps
Current state of EAPS on this switch:
• Yes—EAPS is enabled on the switch.
• No—EAPS is not enabled.
Displays only when Fast Convergence is on.
Number of EAPS domains created. The maximum number of EAPS domains
per switch is 64.
The total number of EAPS bridge links in the system. The maximum count is
8192 on "i" series switches and 4096 on "e" series switches. Each time a
VLAN is added to EAPS, this count increments by 1.
The configured name for this EAPS domain.
The instance number is created internally by the system.
show eaps
1477