Monitor Atm Vp - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

JUNOSe 11.0.x Command Reference Guide A to M

monitor atm vp

monitor atm vp atm interfaceSpecifier vpi [ atm interfaceSpecifier vpi ]*
Syntax
[ load-interval seconds ] [ display-time-of-day ]
Command introduced in JUNOSe Release 7.1.0.
Release Information
Displays bit rate and packet rate statistics over a specified time interval for one or
Description
more ATM virtual paths (VPs). There is no no version.
Options
Privileged Exec, User Exec
Mode
1312
monitor atm vp
interfaceSpecifier—ATM interface specifier; see Interface Types and Specifiers
on page 5
vpi Virtual path identifier of the PVC. The numeric range of the VPI depends
on the line module capabilities and current configuration.
seconds Number of seconds in the range 5–300 that specifies the time interval
at which the router calculates bit rates and packet rates for the specified VP;
default value is 5 seconds
display-time-of-day Sets time at which the router calculates the bit rate and
packet rate statistics for the current interval
* Indicates that one or more parameters can be repeated multiple times in a
list in the command line