Upgrading to an NSM Release that Requires a License
Generating the License Key for an NSM Software-Only Upgrade
Copyright © 2010, Juniper Networks, Inc.
Run the NSM installer image on the server designated as your primary NSM (or primary
1.
GUI Server). The NSM Server generates an installation ID.
Run the NSM 2007.3 or later installer image on the server designated as your secondary
2.
NSM (or secondary GUI Server). The NSM Server generates an installation ID.
Log in to the LMS system and select
3.
Enter the serial number and authorization code of your primary NSM.
4.
For an NSM appliance installation, enter the serial number of the primary server. The
hardware serial number is located on the back of the NSM appliance chassis.
For a software-only installation:
a. Enter the serial number.
The serial number of your software is printed on the paper license certificate given
to you when you purchased NSM. If you do not have the software serial number or
the LMS System fails to recognize the serial number, call Juniper Networks Customer
Service.
b. Enter the installation ID of the primary NSM.
Depending on the package you purchased, Juniper Networks provides an authorization
code via e-mail. If you received a paper license certificate, and are managing more
than 25 devices, call Juniper Networks Customer Service. Customer Service will validate
your purchase and generate a license key.
Select the Need High Availability Key check box. The LMS systems prompts you to
5.
provide the NSM Secondary serial number and Secondary Installation ID.
The LMS system generates a license key file for the SKU recorded. You can choose
to download the file, or to receive it by e-mail.
Save the license key file to your local drive for use during installation.
6.
When you upgrade to an NSM 2007.3 or later release from a version that is older than
2007.3, you need to generate a license key file that requires an installation ID.
To generate the license key file to upgrade to NSM 2007.3 or later release:
Run the NSM installer image on the server designated for NSM. The NSM Server
1.
generates an installation ID.
Log in to the LMS system and select
2.
Enter the serial number and authorization code.
3.
Your serial number is printed on the paper license certificate given to you when you
purchased NSM. If you do not have the serial number or the LMS System fails to
recognize the serial number, call Juniper Networks Customer Service.
Chapter 2: Generating the NSM License Key File
License key generation
for NSM.
License key generation
for NSM.
15
Need help?
Do you have a question about the NETWORK AND SECURITY MANAGER 2010.4 - INSTALLATION GUIDE REV1 and is the answer not in the manual?