Table 132: Show Chassis Fpc Output Fields - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Related
Documentation
List of Sample Output
Output Fields

Table 132: show chassis fpc Output Fields

Field Name Field Description
or Slot number and state. The state can be one of the following conditions:
Slot Slot State
Dead
Diag
Dormant
Empty
Online
Present
by the current version of Junos or inserted in the wrong slot. The output also
states either
coming up but not yet online.
Probed
(PFE).
Probe-wait
Logical slot Slot number.
Copyright © 2010, Juniper Networks, Inc.
request chassis fpc
show chassis fpc (M10 Router) on page 734
show chassis fpc (M20 Router) on page 735
show chassis fpc detail (M Series Routers) on page 735
show chassis fpc detail (MX80 Router) on page 735
show chassis fpc (MX240 Router) on page 735
show chassis fpc (MX480 Router) on page 735
show chassis fpc (MX960 Router) on page 735
show chassis fpc detail (MX Series Routers) on page 736
show chassis fpc (Hardware Not Supported) on page 736
show chassis fpc detail (Hardware Not Supported) on page 736
show chassis fpc pic-status on page 737
show chassis fpc pic-status (M Series Routers) on page 737
show chassis fpc pic-status (M120 Router) on page 737
show chassis fpc lcc (TX Matrix Router) on page 737
show chassis fpc pic-status (TX Matrix Router) on page 738
show chassis fpc pic-status lcc (TX Matrix Router) on page 738
show chassis fpc (TX Matrix Plus Router) on page 738
show chassis fpc lcc (TX Matrix Plus Router) on page 739
show chassis fpc detail (TX Matrix Plus Router) on page 739
show chassis fpc pic-status (TX Matrix Plus Router) on page 741
show chassis fpc (T1600 Router) on page 742
show chassis fpc detail (T1600 Router) on page 742
show chassis fpc <slot-number> (T1600 Router) on page 743
show chassis fpc pic-status (T1600 Router) on page 743
Table 132 on page 733 lists the output fields for the
fields are listed in the approximate order in which they appear.
—Held in reset because of errors.
—Slot is being ignored while the FPC is running diagnostics.
—Held in reset.
—No FPC is present.
—FPC is online and running.
—FPC is detected by the chassis daemon but is either not supported
Hardware Not Supported
—Probe is complete; awaiting restart of the Packet Forwarding Engine
—Waiting to be probed.
Chapter 36: Operational Commands for System Monitoring
show chassis fpc
or . FPC is
Hardware Not In Right Slot
command. Output
Level of Output
all levels
all levels
733