Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 833

show chassis environment routing-engine
Syntax
Syntax (TX Matrix
Routers )
Syntax (TX Matrix Plus
Routers)
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Copyright © 2010, Juniper Networks, Inc.
show chassis environment routing-engine
<slot>
show chassis environment routing-engine
<lcc number | scc>
<slot>
show chassis environment routing-engine
<lcc number | sfc number>
<slot>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
option introduced for the TX Matrix Plus router in Junos OS Release 9.6.
sfc
Display Routing Engine environmental status information.
—Display environmental information about all Routing Engines. For a TX Matrix
none
router, display environmental information about all Routing Engines on the TX Matrix
router and its attached T640 routers. For a TX Matrix Plus router, display
environmental information about all Routing Engines on the TX Matrix Plus router
and its attached T1600 routers.
—(TX Matrix and TX Matrix routers only) (Optional) On a TX Matrix router,
lcc number
display environmental information about the Routing Engine in a specified T640
router (or line-card chassis) that is connected to the TX Matrix router. On a TX Matrix
Plus router, display environmental information about the Routing Engine in a specified
T1600 router (or line-card chassis) that is connected to the TX Matrix Plus router.
Replace number with a value from
—(TX Matrix router only) (Optional) Display environmental information about the
scc
Routing Engine in the TX Matrix router (or switch-card chassis).
sfc —(TX Matrix Plus router only) (Optional) Display environmental information about
the Routing Engine in the TX Matrix Plus router (or switch-fabric chassis).
—(Optional) Display environmental information about an individual Routing Engine.
slot
On M10i, M20, M40e, M120, M160, M320, MX Series, and T Series routers, replace
slot with 0 or 1 . On M5, M7i, M10, and M40 routers and on the J Series router, replace
with . On EX3200 switches and EX4200 standalone switches, replace
slot 0
0. On EX4200 switches in a Virtual Chassis configuration and on EX8208 and EX8216
switches, replace
slot
view
show chassis environment routing-engine (Nonredundant) on page 730
show chassis environment routing-engine (Redundant) on page 730
show chassis environment routing-engine (TX Matrix Plus Router) on page 730
Chapter 36: Operational Commands for System Monitoring
0 through 3 .
with 0 or 1.
with
slot
729