Replacing Fans And Filters - Thermo Scientific ISQ 7000 Hardware Manual

Replacing Fans and Filters

Thermo Scientific
To efficiently cool the ISQ 7000 instrument while it is being used, air must be allowed to flow
in through the front of the instrument and out the back. The instrument is equipped with a
fan that keeps the air flowing and optional filters that minimize the amount of dust that enters
the system. Dust can cause problems by insulating electronic components, which can lead to
overheating. To keep the instrument as cool as possible, we require that you keep all the covers
of the instrument attached while it is in use.
If the fan or filters in your instrument get damaged, you can use the illustration below to
visually locate a component and then follow the process to replace it. If your filters are dirty,
but do not need to be replaced, see
Figure 420. Replaceable Filter Components of the ISQ 7000 Instrument
Chassis
Cooling Fan
"Cleaning the Filters"
Intake Filters and RF Shields
3
Advanced Maintenance
Replacing Fans and Filters
on page 79.
ISQ 7000 Hardware Manual 369