Thermo Scientific ISQ 7000 Hardware Manual page 273

Thermo Scientific
5. Remove the manifold door (and all the other components) and set it on a clean work
surface.
Figure 253. Removing the Front Manifold Plate
Pillow Block
Screws
6. Remove the two screws connecting the pillow block to the front manifold plate.
7. Remove the three screws holding the valve body to the front manifold plate.
Figure 254. Disconnecting the Valve Body
Valve
Body
Screws
3
Advanced Maintenance
Replacing Components of the Manifold
Front
Manifold
Plate
ISQ 7000 Hardware Manual 245