Thermo Scientific ISQ 7000 Hardware Manual page 313

Thermo Scientific
5. On the front interior panel, use a T20 Torxhead screwdriver to remove the hinge support
bracket screw.
Figure 299. Replacing the Hinges on the Front Door
6. Use a T10 Torxhead screwdriver to remove the all four screws connecting each hinge to
the front door and interior front panel.
7. Use a T20 Torxhead screwdriver to remove the screw connecting each hinge support to
the interior front panel.
Figure 300. Replacing the Hinge Supports
Hinge Support
3
Advanced Maintenance
Replacing Components of the Front Door
Hinge Screws
Hinge Support
Bracket Screw
ISQ 7000 Hardware Manual 285