Thermo Scientific ISQ 7000 Hardware Manual page 219

Thermo Scientific
15. Reattach the thumbscrew-repeller spacers.
Figure 172. Reattaching the Thumbscrew-Repeller Spacers
16. Attach the source-repeller thumbscrews to the endcaps and twist them back on. When
you are tightening the thumbscrews, make sure the spacers stay in the groove or you could
crush them.
Figure 173. Reattaching the Source-Repeller Thumbscrews
Source-Repeller Thumbscrews
Thumbscrew-Repeller Spacers
3
Advanced Maintenance
Replacing Components of the Ion Source
ISQ 7000 Hardware Manual 191