Thermo Scientific ISQ 7000 Hardware Manual page 79

Thermo Scientific
a. With your hand around the barrel, twist the tool until the alignment groove at the
end of the barrel aligns with the left screw around the slot vacated by the vacuum
interlock knob.
Figure 33. Inserting the Ion Volume Tool
b. Twist and push the barrel to the right until it clicks into place under the screw at the
top of the slot.
Figure 34. Twisting the Tool Into Place
1
Performing Routine Maintenance
Cleaning the Ion Source Cartridge
Alignment
Alignment
ISQ 7000 Hardware Manual 51