Thermo Scientific ISQ 7000 Hardware Manual page 111

Thermo Scientific
Figure 79. Inserting the AEI Ion Volume into the Advanced EI Ion Source Cartridge
3. Insert the AEI filament shield into the AEI filament insulator. See
Figure 80. Preparing the AEI Filament Shield for Reassembly
4. Insert the AEI filament shield assembly into the AEI ion source cartridge. Rotational
orientation does not matter. See Figure 81.
1
Performing Routine Maintenance
Cleaning the Ion Source Cartridge
Figure 80.
ISQ 7000 Hardware Manual 83