Thermo Scientific ISQ 7000 Hardware Manual page 378

3
Advanced Maintenance
Replacing the Power Supplies
350 ISQ 7000 Hardware Manual
4. Disconnect the large feedthrough cables.
Figure 390. Disconnecting the Large Feedthrough Cables
5. Use a T20 Torxhead screwdriver to remove the screws connecting the dynode/multiplier
power supply to the back and bottom of the chassis.
Figure 391. Removing the Dynode/Multiplier Power Supply
Back
Screws
Dynode/Multiplier
Power Supply
Bottom
Screw
Large
Electron Multiplier
Plate
Thermo Scientific