2
Troubleshooting
Using Diagnostics
Using Diagnostics
Creating a Diagnostic Tune File
116
ISQ 7000 Hardware Manual
If your ISQ 7000 instrument is running poorly or suspiciously, you can run software
diagnostics to detect the problem and find a solution. Diagnostics tests electronic circuits and
reports whether the circuits pass or fail. However, problems in sensitivity due to
misalignment, dirty components, or improper tuning are not detected by the software.
To create a diagnostic tune file:
1. Select AutoTune Options | Advanced AutoTune on the ISQ 7000 Dashboard to run
diagnostics.
Figure 106. Opening the Tune Type Editor
Thermo Scientific