Thermo Scientific ISQ 7000 Hardware Manual page 365

Thermo Scientific
4. Disconnect the electrometer board cable and large feedthrough cable.
Figure 372. Disconnecting the Electron Multiplier Cables
Electrometer
Board Cable
5. The RF board is the second board standing on end toward the center of the ISQ 7000
instrument. Use a T20 Torxhead screwdriver to remove the screw holding the board and
bracket to the chassis.
Figure 373. Removing the RF Board and Bracket
3
Replacing the Boards in the ISQ 7000 Mass Spectrometer
Electron Multiplier
Plate
RF Board
Chassis
Screw
ISQ 7000 Hardware Manual
Advanced Maintenance
Large
Bracket
337