Thermo Scientific ISQ 7000 Hardware Manual page 188

3
Advanced Maintenance
Replacing Components of the Analyzer
160 ISQ 7000 Hardware Manual
5. Use a T20 Torxhead screwdriver to remove the two screws on the back of the ion source.
Figure 128. Reattaching the Ion Source to the Analyzer Tray
Ion Source
Block
Screws
Grounding
Strap
6. Remove the ion source from the analyzer tray and set it aside.
7. Replace the analyzer tray with a new one if needed.
Figure 129. Replacing the Analyzer Tray
Thermo Scientific