Thermo Scientific ISQ 7000 Hardware Manual page 345

Thermo Scientific
21. Look through the left side of the instrument and tighten the screw that holds the lens
driver board in place on the chassis.
Figure 346. Reattaching the Lens Driver Board
22. Reattach the top cover and left side panels and tighten the screws.
23. Restart your system by following the instructions in
3
Advanced Maintenance
Replacing the Boards in the ISQ 7000 Mass Spectrometer
Lens Driver Board Screw
"Restarting the System"
ISQ 7000 Hardware Manual
on page 165.
317