Thermo Scientific ISQ 7000 Hardware Manual page 406

4
Upgrade Equipment
Advanced EI Ion Source
378 ISQ 7000 Hardware Manual
Figure 431. Installing the AEI Source
14. Attach the wires to the source interface board. See
attaching the wires to the source interface board, see
Shield" on page 334.
Figure 432. Attaching the Wires to the Source Interface Board
15. Reattach the manifold door and the four screws.
16. Restart your system by following the instructions in
Spectrometer" on page
17. Store the ExtractaBrite source and the magnet parts in the AEI Case and screw the case
insert top down. See
9.
Figure 433.
Figure 432. For more instructions on
"Source Interface Board and Heat
"Powering On the ISQ 7000 Mass
Thermo Scientific