Thermo Scientific ISQ 7000 Hardware Manual page 344

3
Advanced Maintenance
Replacing the Boards in the ISQ 7000 Mass Spectrometer
316 ISQ 7000 Hardware Manual
18. Close the manifold door and reattach the four screws.
Figure 344. Closing the Manifold Door
19. Reinsert the lens driver board by aligning the connector on the bottom of the board with
the connectors on the distribution board beneath it. It will drop into the slot when it is in
the right position.
Figure 345. Reinstalling the Lens Driver Board
Connector
20. Push the board down into the connector.
Screws
Thermo Scientific