Thermo Scientific ISQ 7000 Hardware Manual page 325

Thermo Scientific
Note The new RF board will have a slightly different performance than your current
board. It will need to be adjusted by a Field Service Engineer because the adjustments
must be made while the system is running.
16. Reattach the top cover panel and tighten the screw holding it in place.
17. Restart your system by following the instructions in
3
Advanced Maintenance
Replacing the Boards in the ISQ 7000 Mass Spectrometer
"Restarting the System"
ISQ 7000 Hardware Manual
on page 165.
297