Thermo Scientific ISQ 7000 Hardware Manual page 333

Thermo Scientific
16. Reattach the screw holding the RF board in place.
Figure 326. Reattaching the RF Board and Bracket
Note This screw is required for good ground contact.
17. Reconnect the wires to the 4-pin connector.
Figure 327. Reconnecting the Wires
4-pin
Connector
CAUTION - INSTRUMENT DAMAGE: Make sure you reattach these wires to the same
connectors they were attached to before.
Replacing the Boards in the ISQ 7000 Mass Spectrometer
RF Board
Wires
3
Advanced Maintenance
Chassis
Screw
Bracket
ISQ 7000 Hardware Manual 305