Troubleshooting; Diagnostics Mode - Thermo Scientific Orion 2117HL User Manual

Diagnostics Mode

Default Operator Action
Diagnostics
Press
measure mode to enter the
diagnostics mode.
The system will enter the
diagnostics mode at the
calibration log menu.
Press
the menu items.
Thermo Scientific Orion 2117HL High Level Chloride Analyzer User Guide
Chapter VI
• From the measure mode, press
• Each menu is sequential. Press
menu selections.
•
Scrolling Marquee
CH1 CALIBRATION SLOPE AND E
while in the
CH2 CALIBRATION CELL CONSTANT
CH1 ERROR LIST PRESS VIEW
CH2 ERROR LIST PRESS VIEW
CH1 – SELECT TIME/DATE TO VIEW MEASUREMENT LOG
CH2 – SELECT TIME/DATE TO VIEW MEASUREMENT LOG
SELECT TIME/ DATE TO VIEW STATUS LOG
SOFTWARE REV NUMBER
to step through
CH1 SERIAL NUMBER
CH2 SERIAL NUMBER
CH1 MODEL NUMBER
CH2 MODEL NUMBER
CH1 MEASURE mV AND NOISE
CH2 MEASURE mV AND NOISE
CH1 mA OUTPUT VALUES SENSOR/TEMP
CH2 mA OUTPUT VALUES SENSOR/TEMP
PRESS ENTER FOR THE DISPLAY TEST
PRESS ENTER TO CONTINUE
PRESS ENTER TO CONTINUE
KEYPAD TEST PRESS ALL KEYS ONE AT A TIME

Troubleshooting

key allows access to menus used for system diagnostics.
can be pressed at any time to return to the measure mode.
0
to enter the diagnostics mode. The
to scroll through the diagnostics
Main Notes
Display
The display will If only one board
change with is installed in the
each menu analyzer, only
one menu option
will be shown
in the scrolling
marquee instead
of CH1 and CH2
menu options.
VI-1