Free User-Interface - HP 6125XLG Command Reference Manual

1. Display online users.
<Sysname> display users
Idx
10
+ 11
Following are more details.
VTY 0
VTY 1
+
F
2. If the operations of the user on VTY 1 impact your operations, log out the user.
<Sysname> free line vty 1
Are you sure to free line vty1? [Y/N]:y
[OK]

free user-interface

Use free user-interface to release a user line.
Syntax
free user-interface { number1 | { aux | console | vty } number2 }
Views
User view
Predefined user roles
network-admin
Parameters
number1: Specifies the absolute number of a user line, in the range of 0 to 83.
aux: Specifies the AUX line.
console: Specifies the console line.
vty: Specifies the VTY line.
number2: Specifies the relative number of a user line. The value range is 0 to 9 for the AUX or console
line and 0 to 63 for the VTY line.
Usage guidelines
This command does not release the line you are using.
This is an older command reserved for backward compatibility purposes. Although it has the same
functionality and output as the free line command, HP recommends you use the free line command.
Examples
# Release user line VTY 1:
1. Display online users.
<Sysname> display users
Line Idle
VTY 0 00:10:49
VTY 1 00:00:00
:
Location: 192.168.1.12
:
Location: 192.168.1.26
: Current operation user.
: Current operation user works in async mode.
Time Pid
Jun 11 11:27:32 320
Jun 11 11:39:40 334
26
Type
TEL
TEL