Free User-Interface - HP FlexFabric 7900 Series Command Reference Manual

Syntax
free line { number1 | { aux | vty } number2 }
Views
User view
Predefined user roles
network-admin
mdc-admin
Parameters
number1: Specifies the absolute number of a user line. The value range is 0 to 65 in standalone
mode and 0 to 71 in IRF mode.
aux: Specifies the AUX line.
vty: Specifies the VTY line.
number2: Specifies the relative number of a user line. The value ranges are as follows:
• AUX line—0 to 1 in standalone mode and 0 to 7 in IRF mode.
VTY line—0 to 63.
•
Usage guidelines
This command does not release the line you are using.
Examples
# Release user line VTY 1:
1. Display online users.
<Sysname> display users
Idx
10
+ 11
Following are more details.
VTY 0
VTY 1
+
F
2. If the operations of the user on VTY 1 impact your operations, log out the user.
<Sysname> free line vty 1
Are you sure to free line vty1? [Y/N]:y
[OK]

free user-interface

Use free user-interface to release a user line.
Syntax
free user-interface { number1 | { aux | vty } number2 }
Line Idle
VTY 0 00:10:49
VTY 1 00:00:00
:
Location: 192.168.1.12
:
Location: 192.168.1.26
: Current operation user.
: Current operation user works in async mode.
Time Pid
Jun 11 11:27:32 320
Jun 11 11:39:40 334
26
Type
TEL
TEL