Display Vsi Remote - HP 5800 series Command Reference Manual

display vsi remote

Description
Use the display vsi remote command to display information about remote VPLS connections using a
specified signaling protocol.
Related commands: vsi.
Syntax
display vsi remote { bgp | ldp } [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
bgp: Displays information about remote VPLS connections using the signaling protocol of BGP.
ldp: Displays information about remote VPLS connections using the signaling protocol of LDP.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case-sensitive string of 1 to 256 characters.
Examples
# Display information about remote VPLS connections using LDP.
<Sysname> display vsi remote ldp
Vsi
ID
500
Table 88 Command output
Field
Vsi ID
Peer Router ID
VC Label
Group ID
Vsi Type
MTU Value
Vsi Index
Peer VC
RouterID Label
60.1.1.1 524688
Group Vsi
ID Type
0 vlan
Description
ID of the VPLS instance
ID of the peer
Label of the VC
ID of the group
Encapsulation type of the VPLS instance
Maximum transmission unit
Index of the VPLS instance
216
MTU Vsi
Value Index
1500 0