Display Ripng Interface - HP 6125XLG Command Reference Manual

Table 73 Command output
Field
cost
imported
RIPng-interface
via

display ripng interface

Use display ripng interface to display interface information for a RIPng process.
Syntax
display ripng process-id interface [ interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
process-id: Specifies a RIPng process by its ID in the range of 1 to 65535.
interface-type interface-number: Specifies an interface by its type and number. If no interface is specified,
this command displays information about all interfaces for the RIPng process.
Examples
# Display interface information for RIPng process 1.
<Sysname> display ripng 1 interface
Interface: Vlan-interface12
Link-local address: FE80::20C:29FF:FEC8:B4DD
Split-horizon: On
MetricIn: 0
Default route: Off
Summary address:
Table 74 Command output
Field
Interface
Link Local Address
Split-horizon
Description
Route metric value.
Indicates the route is redistributed from another routing protocol.
Route learned from the interface.
Next hop IPv6 address.
1::/16
Poison-reverse: Off
MetricOut: 1
Description
Name of an interface running RIPng.
Link-local address of an interface running RIPng.
Indicates whether the split horizon function is enabled:
•
On—Enabled.
•
Off—Disabled.
334