Display Radius Statistics - HP 5120 SI series Command Reference Manual

Field
NAS-IP address
Attribute 25

display radius statistics

Syntax
display radius statistics [ slot slot-number ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
2: System level
Parameters
slot slot-number: Specifies the member number of the device in the IRF virtual device, which you can
display with the display irf command. The value range for the slot-number argument depends on the
number of members and numbering conditions in the current IRF virtual device. If no IRF virtual device
exists, the slot-number argument is the current device number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case-sensitive string of 1 to 256 characters.
Description
Use the display radius statistics command to display statistics about RADIUS packets.
Related commands: radius scheme.
Examples
# Display statistics about RADIUS packets on slot 1.
<Sysname> display radius statistics slot 1
Slot 1:state statistic(total=1048):
DEAD = 1048
AcctStart = 0
AcctStop = 0
StateErr = 0
Received and Sent packets statistic:
Sent PKT total
Received PKT total = 23
Resend Times
1
2
Description
Source IP address for outgoing RADIUS packets
Interprets RADIUS attribute 25 as the CAR parameters.
AuthProc = 0
RLTSend = 0
OnLine = 0
= 1547
Resend total
508
508
AuthSucc = 0
RLTWait = 0
Stop = 0
43