Display Icmp Statistics - HP 6125G Command Reference Manual

If no mask or mask length is specified, the FIB entry that matches the destination IP address and has the
longest mask will be displayed. If the mask is specified, the FIB entry that exactly matches the specified
destination IP address will be displayed.
Examples
# Display the FIB entries that match the destination IP address of 10.2.1.1.
<Sysname> display fib 10.2.1.1
Destination count: 1
Flag:
U:Useable
R:Relay
Destination/Mask
10.2.1.1/32
For description about the output, see

display icmp statistics

Syntax
display icmp statistics [ slot slot-number ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
slot slot-number: Displays the ICMP statistics on a specified IRF member switch. The slot-number
argument specifies the ID of an IRF member switch. The value range for the argument depends on the
number of member switches and their member IDs in the IRF fabric, which you can display with the
display irf command. On a standalone device, the slot-number argument specifies the ID of the device.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display icmp statistics to display ICMP statistics.
Related commands: display ip interface and reset ip statistics.
Examples
# Display ICMP statistics.
<Sysname> display icmp statistics
Input: bad formats
FIB entry count: 1
G:Gateway H:Host
Nexthop Flag
127.0.0.1 UH
Table
0
B:Blackhole D:Dynamic
OutInterface InnerLabel Token
InLoop0 Null
17.
bad checksum
80
S:Static
Invalid
0