Display Fib Ip-Address - HP 6125G Command Reference Manual

Field
Nexthop
Flag
OutInterface
InnerLabel
Token

display fib ip-address

Syntax
display fib [ vpn-instance vpn-instance-name ] ip-address [ mask | mask-length ] [ | { begin | exclude |
include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
vpn-instance vpn-instance-name: Displays the FIB entries of the specified VPN. The vpn-instance-name
argument is a case-sensitive string of 1 to 31 characters. Without this option specified, FIB entries of the
public network are displayed.
ip-address: Destination IP address, in dotted decimal notation.
mask: IP address mask.
mask-length: Length of IP address mask.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display fib ip-address to display FIB entries that match the specified destination IP address.
Description
Next hop address
Flags of routes:
•
U—Usable route
•
G—Gateway route
•
H—Host route
•
B—Blackhole route
•
D—Dynamic route
•
S—Static route
•
R—Relay route
Outbound interface
Inner label
Link-state packet (LSP) index number
79