Display Fib Ip-Address - HP A5120 EI Series Command Reference Manual

Field
Flag
OutInterface
InnerLabel
Token

display fib ip-address

Syntax
display fib ip-address [ mask | mask-length ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
ip-address: Specifies the destination IP address, in dotted decimal notation.
mask: Specifies the IP address mask.
mask-length: Specifies the length of the IP address mask.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use the display fib ip-address command to display FIB entries that match the specified destination IP
address.
If no mask or mask length is specified, the FIB entry that matches the destination IP address and has the
longest mask will be displayed; if the mask is specified, the FIB entry that exactly matches the specified
destination IP address will be displayed.
Examples
# Display the FIB entries that match the destination IP address of 10.2.1.1.
Description
Flags of routes:

―U‖—Usable route

―G‖—Gateway route

―H‖—Host route

―B‖—Blackhole route

―D‖—Dynamic route

―S‖—Static route

―R‖—Relay route
Outbound interface
Inner label
Link-state packet (LSP) index number
110