Lacp Period Short; Lacp System-Priority - HP 6125G Command Reference Manual

[Sysname-Bridge-Aggregation1]

lacp period short

Syntax
lacp period short
undo lacp period
View
Ethernet interface view
Default level
2: System level
Parameters
None
Description
Use lacp period short to set the LACP timeout interval on a port to the short timeout interval (1 second).
Use undo lacp period to restore the default setting.
The default LACP timeout interval is the long timeout interval (30 seconds).
Examples
# Set the LACP timeout interval on GigabitEthernet 1/0/1 to the short timeout interval (1 second).
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] lacp period short

lacp system-priority

Syntax
lacp system-priority system-priority
undo lacp system-priority
View
System view
Default level
2: System level
Parameters
system-priority: Specifies the LACP priority of the local system, in the range of 0 to 65535. The smaller the
value, the higher the system LACP priority.
Description
Use lacp system-priority to set the LACP priority of the local system.
Use undo lacp system-priority to restore the default setting.
By default, the system LACP priority is 32768.
76