Lacp System-Priority - HP 12500 Series Command Reference Manual

undo lacp period
Default
The LACP timeout interval is the long timeout interval (90 seconds).
Views
Layer 2 Ethernet interface view, Layer 3 Ethernet interface view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
If you configure the short timeout interval, the peer sends LACPDUs quickly (one LACPDU per
second); if you configure the long timeout interval, the peer sends LACPDUs slowly (one LACPDU
every 30 seconds).
Before performing an ISSU, restore the LACP timeout interval to the default value for each member
port in dynamic aggregation groups. For information about ISSU, see Fundamentals Configuration
Guide.
Examples
# Set the LACP timeout interval on GigabitEthernet 3/0/1 to the short timeout interval (3 seconds).
<Sysname> system-view
[Sysname] interface GigabitEthernet 3/0/1
[Sysname-GigabitEthernet3/0/1] lacp period short

lacp system-priority

Use lacp system-priority to set the system LACP priority.
Use undo lacp system-priority to restore the default setting.
Syntax
lacp system-priority system-priority
undo lacp system-priority
Default
The system LACP priority is 32768.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
system-priority: Specifies the system LACP priority in the range of 0 to 65535. The smaller the value,
the higher the system LACP priority.
28