Display Qos-Interface Traffic-Limit; Display Qos-Interface Traffic-Priority - 3Com 5500G-EI Command Reference Manual

display qos-interface
traffic-limit
display
qos-interface
traffic-priority
Inbound:
Matches: Acl 2000 rule 1 running
Mirrored to: monitor interface
Syntax
display qos-interface {
interface-num | unit-id
View
All views
Parameter
interface-name | interface-type interface-num
the Switch, for more information, refer to the
: Unit ID of the Switch.
unit-id
Description
Use the

display qos-interface traffic-limit

limit settings. If you set the port parameters, the configuration information about
the specified port will be displayed. The information displayed includes the ACL of
the traffic to be limited, the limited average rate and the settings of some related
policing action.
Related commands:
traffic-limit.
Example
Display the traffic limit settings.
<SW5500> display qos-interface gigabitethernet1/0/1 traffic-limit
GigabitEthernet1/0/1: traffic-limit
Inbound:
Matches: Acl 2000 rule
Target rate: 128 Kbps
Syntax
display qos-interface {
interface-num | unit-id
View
All views
Parameter
interface-name | interface-type interface-num
the Switch, for a detailed description, refer to the
: Unit ID of the Switch.
unit-id
Description
Use the

display qos-interface traffic-priority

traffic priority settings.
QoS Configuration Commands List
interface-name | interface-type
} traffic-limit
port
command to view the traffic
running
interface-name | interface-type
} traffic-priority
port
:: Specifices an Interface of
command in this manual.
:: Specifies an interface of
command in this manual.
command to view the
293