Passive; Put - 3Com 5500G-EI Command Reference Manual

Parameter
pathname
:
Description
Use the
mkdir
User can perform this operation as long as the remote FTP server has authorized
the operation.
Example
Create the directory
[ftp]mkdir flash:/lanswitch

passive

Syntax
passive
undo passive
View
FTP Client view
Parameter
None
Description
Use the
passive
mode. Use the
active mode.
By default, the data transmission mode is passive mode
Example
Set the data transmission to passive mode.
[ftp]passive

put

Syntax
put localfile
View
FTP Client view
Parameter
localfile
remotefile
Description
Use the
put
If the user does not specify the filename on the remote server, the system will
consider it the same as the local file name by default.
Directory name.
command to create a directory on the remote FTP Server.
flash:/lanswitch
command to set the data transmission mode to be passive
command to set the data transmission mode to be
undo passive
[ remotefile ]
Local file name.
:
File name on the remote FTP Server.
:
command to upload a local file to the remote FTP Server.
FTP Client Commands
on the remote FTP Server.
427