Dhcp-Server - 3Com 5500G-EI Command Reference Manual

120 C 5: U N
HAPTER SING

dhcp-server

P C
ETWORK ROTOCOL OMMANDS
undo dhcp-security {
View
System View
Parameters
Enter a static address.
static
Enter the client's static IP address.
ip_address
mac_address Enter the client's MAC address.
Enter to cancel all address table entry.
all
Enter to cancel dynamic address table entry.
dynamic
Enter to cancel static address table entry.
static
Description
Use the
dhcp-security
DHCP Server group.
Use the
undo dhcp-security
DHCP Server group.
Related command:
Example
To assign the IP address 1.1.1.1 to the MAC address 0005-5D02-F2B3, and add
this information to the static address table, enter the following:
<SW5500>system-view
System View: return to User View with Ctrl+Z.
[SW5500]dhcp-security static 1.1.1.1 0005-5D02-F2B3
Syntax
groupNo
dhcp-server
undo dhcp-server
View
VLAN Interface View
Parameter
Enter the DHCP Server group number, in the range 0 to 19.
groupNo
Description
Use the
dhcp-server
group. DHCP Server requests are forward to the server associated with this group
from the specified interface.
ip_address
| all | dynamic | static }
command to configure a static address table entry for a
command to cancel a address table entry for a
display dhcp-security
command to associate a VLAN interface with a DHCP Server
.