Interface Vlan-Interface; Port - 3Com 5500G-EI Command Reference Manual

82 C 3: U
HAPTER SING

interface VLAN-interface

VLAN C
OMMANDS
the command
the command
dynamically by the system. Use the command
information of VLAN created statically by the system.
Related command:
Examples
To display information about VLAN 1:
<SW5500>display vlan 1
VLAN ID: 1
VLAN Type: static
Route Interface: configured
IP Address: 161.71.61.206
Subnet Mask: 255.255.255.0
Description: VLAN 0001
Tagged Ports:
GigabitEthernet1/0/1 GigabitEthernet1/0/2 GigabitEthernet 1/0/3
Untagged Ports:
Ethernet1/0/1
Syntax
interface vlan-interface
undo interface vlan-interface
View
System View
Parameter
Enter the ID of the VLAN interface you want to configure, in the range
vlan_id:
1 to 4094. Note that VLAN1 is the default VLAN and cannot be deleted.
Description
Use the
interface vlan-interface
and use the related configuration commands. Use the
vlan-interface
Related command:
Example
To enter the interface view of VLAN1, enter the following:
<SW5500>system-view
System View: return to User View with Ctrl+Z.
[SW5500]interface vlan-interface 1

port

Syntax
interface_list
port
to display information on all the VLANs. Use
display vlan all
display vlan dynamic
.
vlan
Ethernet1/0/2
vlan_id
vlan_id
command to exit the current VLAN interface.
display interface vlan-interface
to display information on VLANs created
display vlan static
Ethernet1/0/3
command to enter a VLAN interface view
undo interface
.
to display