Mac-Address Max-Mac-Count; Mac-Address Timer - 3Com 5500G-EI Command Reference Manual

434 C 12: U
HAPTER SING
mac-address
max-mac-count

mac-address timer

S M C
YSTEM ANAGEMENT OMMANDS
[SW5500]mac-address static 00e0-fc01-0101 interface gigabitethernet
1/0/1 vlan 2
Syntax

mac-address max-mac-count

undo mac-address max-mac-count
View
Ethernet port view
Parameter
Enter a value in the range 0 to 32768 to specify how many MAC
count:
addresses a port can learn. 0 means that the port is not allowed to learn MAC
addresses.
Description
Use the
mac-address max-mac-count
number of MAC addresses that can be learned by a specified Ethernet port. The
port stops learning MAC addresses when the specified limit is reached.
Use the
undo mac-address-table max-mac-count
maximum limit on the number of MAC addresses learned by an Ethernet port. This
is the default. If you set no maximum limit, the MAC address table controls the
number of MAC addresses a port can learn.
Related commands:
Examples
Configure the port GigabitEthernet 1/0/3 to learn at most 600 MAC addresses.
<SW5500>system-view
System View: return to User View with Ctrl+Z.
[SW5500]inteface GigabitEthernet 1/0/3
[SW5500-GigabitEthernet1/0/3]mac-address max-mac-count 600
Cancel the maximum limit on the number of MAC addresses learned by the port
GigabitEthernet1/0/3.
<SW5500>system-view
System View: return to User View with Ctrl+Z.
[SW5500]inteface GigabitEthernet 1/0/3
[SW5500-GigabitEthernet1/0/3]undo mac-address max-mac-count
Syntax
mac-address timer { aging
undo mac-address timer aging
View
System view
count
command to configure the maximum
,
mac-address mac-address timer
age | no-aging }
command to cancel the