Set Switch Startup Mode; Reboot; Boot Menu File Download Commands - 3Com 5500G-EI Command Reference Manual

Set Switch Startup Mode

Reboot

Boot Menu File
Download Commands
Are you sure to disable bootrom password recovery? Yes or
No(Y/N) n
If the bootrom super password is disabled and the bootrom password (set at Boot
Menu Option 5) is lost, bootrom access is no longer possible. If access to the
bootrom menu is required, the Switch will need to be returned to 3Com for repair.
The super password is a fixed password that is based on the hardware of the
Switch. Once the Switch has been registered with 3Com, this password can be
supplied to the registered owner by contacting 3Com technical support.
Enter Option 9 at the prompt to allow the Power on Self Test (POST) mode to be
selected. The following is displayed:
The current mode is fast startup mode!
Are you sure to change it to full startup mode? Yes or
No(Y/N)n
Full startup mode supplies additional POST information via the console.
Enter Option 0 at the prompt to reboot the Switch. The following is displayed:
Starting......
Enter Option 1 from the Boot menu to display the following download options:
Selecting a TFTP download
1. Set TFTP protocol parameter
2. Set FTP protocol parameter
3. Set XMODEM protocol parameter
0. Return to boot menu
Enter your choice(0-3): 1
Load File name
Switch IP address
Server IP address
Are you sure to download file to flash? Yes or No(Y/N)
Attached TCP/IP interface to netdrv0.
0x83fbb6a0 (tNetTask): arp info overwritten for a147a5b2 by
00:0d:54:9a:fa:20
Attaching network interface lo0...done.
Loading......................................................
...................
..............done
Free flash Space: 10491904 bytes
Writing
flash........................................................
...........
..done!
Please input the file attribute (main/backup/none):none
done!
:s4b03_01_04s168.app
:10.1.1.200
:10.1.1.177
Boot Menu 529