Area; Asbr-Summary - 3Com 5500G-EI Command Reference Manual

178 C 6: U R
HAPTER SING

area

asbr-summary

P C
OUTING ROTOCOL OMMANDS
ABR. For each network segment configured with route aggregation, there is only
one route transmitted to other areas.
Example
To enter area 1, and then aggregate the network segments, 66.48.10.0 and
66.48.120.0 into the summary route 66.48.0.0, enter the following:
<SW5500>system-view
System View: return to User View with Ctrl+Z.
[SW5500]router id 1.1.1.1
[SW5500]ospf
[SW5500-ospf-1]area 1
[SW5500-ospf-1-area-0.0.0.1]network 66.48.10.0 0.0.0.255
[SW5500-ospf-1-area-0.0.0.1]network 66.48.120.0 0.0.0.255
[SW5500-ospf-1-area-0.0.0.1]abr-summary 66.48.0.0 255.255.0.0
Syntax
area area_id
area
undo area
View
OSPF view
Parameter
Enter the ID of the OSPF area. This can either be in IP address format, or
area_id
as a number in the range 0 to 4294967295.
Description
Use the command to enter an OSPF area view.
area
Use the
undo area
Example
To enter the OSPF area view 0, enter the following:
<SW5500>system-view
System View: return to User View with Ctrl+Z.
[SW5500]router id 1.1.1.1
[SW5500]ospf
[SW5500-ospf]area 0
[SW5500-ospf-area-0.0.0.0]
Syntax
asbr-summary
undo asbr-summary
View
OSPF view
Parameter
Enter the matched IP address.
ip_address
id
_
command to exit from the OSPF area view.
ip_address mask [ not-advertise | tag value ]
ip-address mask